国外标准列表

[国外标准] AWS B2.1-1-203-96(R2007) 主要用于管道的、在焊接条件下、(M-1／P-1／S-1,1或2组)1／8到3／4英寸厚、E6010(垂直向上)碳钢的药皮焊条电弧焊

[国外标准] AWS B2.1-1-203-96 Carbon Steel (M-1／P-1／S-1. Group 1 or 2). 1／8 Through 3／4 Inch Thick. E6010 (Verti

[国外标准] AWS B2.1-1-202-96(R2007) 主要用于管道的、在焊接条件下、(M-1／P-1／S-1,1或2组)1／8到3／4英寸厚、E6010(垂直向上)及E7018(垂直向上)碳钢

[国外标准] AWS B2.1-1-202-96 Carbon Steel (M-1／P-1／S-1. Group 1 or 2). 1／8 Through 3／4 Inch Thick. E6010 (Verti

[国外标准] AWS B2.1-1-201-96(R2007) 主要用于管道的、在焊接条件下、(M-1／P-1／S-1,1或2组)1／8到3／4英寸厚、E6010(垂直向上)及E7018(垂直向上)碳

[国外标准] AWS B2.1-1-201-96 Carbon Steel (M-1／P-1／S-1. Group 1 or 2). 1／8 Through 3／4 Inch Thick. E6010 (Verti

[国外标准] AWS B2.1-1-027-1998 Standard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc

[国外标准] AWS B2.1-1-026-94 Carbon Steel (M-1／P-1／S-1. Group 1 or 2). 1／8 Through 1-1／2 Inch Thick. E6010 (Ver

[国外标准] AWS B2.1-1-022-94 Carbon Steel (M-1／P-1／S-1. Group 1 or 2). 1／8 Through 1-1／2 Inch Thick. E6010 (Ver

[国外标准] AWS B2.1-1-021-94 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Follow

[国外标准] AWS B2.1-1-020-94 Standard Welding Procedure Specification (WPS) for 75％ Ar／25％ CO2 Shielded Flux Co

[国外标准] AWS B2.1-1-019-94 Standard Welding Procedure Specification (WPS) for CO2 Shielded Flux Cored Arc Wel

[国外标准] AWS B2.1-1-018-94 Standard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc We

[国外标准] AWS B2.1-1-017-94 Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of C

[国外标准] AWS B2.1-1-016-94 Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of C

[国外标准] AWS B2.1-1-012-2002 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格的碳钢(M1,组1)的保护金属焊条电弧焊

[国外标准] AWS B2.1-1-011-2002 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格的镀锌钢的保护金属焊条电弧焊

[国外标准] AWS B2.1-1-008-2002 在焊接条件下、有或没有垫板、10到18规格的碳钢(M1,组1)的钨电极惰性气体保护焊

[国外标准] AWS B2.1-1-007-2002 在焊接条件下、有或没有垫板、10到18规格的镀锌钢的钨电极惰性气体保护焊

[国外标准] AWS B2.1-1-004-2002 在焊接条件下、有或没有垫板、10到18规格的碳钢(M1,组1)的气体保护金属极电弧焊

[国外标准] AWS B2.1-1-003-2002 在焊接条件下、有或没有垫板、10到18规格的镀锌钢的气体保护金属极电弧焊

[国外标准] AWS B2.1-1-002-90(R2006) 主要用于管道的、在焊接条件下(M-1／P-1、1或2组)3／36-7／8英寸厚钨极电弧焊的标准焊接程序规范(WPS)

[国外标准] AWS B2.1-1 8-231-2002 带可熔嵌入焊条的碳钢气体钨电弧焊的标准焊接工艺规程,(M-1P-1S-1,1和2组)到奥氏体钢(M-8P-8S-8,1组),18到1-

[国外标准] AWS B2.1-1 8-230-2002 带可熔嵌入焊条的碳钢钨板惰性气体保护焊的标准焊接工艺规程(M-1P-1S-1,1和2组)到奥氏体不锈钢(M-8P-8S-8,1组),116到1-12英寸厚,

[国外标准] AWS B2.1-1 8-229-2002 碳素钢的手工电弧焊紧接着的钨板惰性气体保护焊的标准焊接工艺规程(M-1P-1 S-1,1和2组)到奥氏体不锈钢(M-8 P-8S-8,1组),18到1-12