国外标准列表

[国外标准] JIS B1053-1999 用碳钢和合金钢制成的紧固件的机械特性.不超过拉伸强度的紧固螺纹和类似螺纹紧固件

[国外标准] JIS B1052-1998 钢制螺母的机械性能

[国外标准] JIS B1051-2000 碳素钢和合金钢紧固件的机械特性.第1部分：螺栓、螺钉和螺柱

[国外标准] JIS B1048-2007 Fasteners --Hot dip galvanized coatings

[国外标准] JIS B1047-2006 Passivation of corrosion-resistant stainless-steel fasteners

[国外标准] JIS B1046-2005 Fasteners-Non-electrolytically applied zinc flake coatings

[国外标准] JIS B1045-2001 Fasteners-Preloading test for the detection of hydrogen embrittlement-Parallel bearin

[国外标准] JIS B1044-2001 Fasteners-Electroplated coatings

[国外标准] JIS B1043-1993 Fasteners-Surface discontinuities-Part 3：Bolts, screws and studs for special requirem

[国外标准] JIS B1042-1998 Fasteners-Surface discontinuities-Part 2：Nuts

[国外标准] JIS B1041-1993 Fasteners-Surface discontinuities-Part 1：Bolts, screws and studs for general requirem

[国外标准] JIS B1022-1999 Tolerances for fasteners-Part 3：Plain washers for bolts, screws and nuts-Product grad

[国外标准] JIS B1021-2003 Tolerances for fasteners-Part 1：Bolts, screws,studs and nuts-Product grades A,B and C

[国外标准] JIS B1018-2009 紧固件.ISO米制外螺纹用螺纹偏心度

[国外标准] JIS B1016-2006 Gauging of hexagon sockets

[国外标准] JIS B1015-2008 螺栓和螺钉头的星型槽尺寸

[国外标准] JIS B1015-2001 Hexalobular internal driving feature for bolts and screws

[国外标准] JIS B1014-1994 Countersunk flat head screws-Part 2：Penetration depth of cross recesses

[国外标准] JIS B1013-1994 Countersunk head screws-Head configuration and gauging

[国外标准] JIS B1012-1985 Cross Recesses for Screws

[国外标准] JIS B1011-1987 Centre Holes

[国外标准] JIS B1010-2003 Designation system for fasteners

[国外标准] JIS B1009-1991 Bolts, screws and studs-Nominal lengths , and thread lengths for general purpose bolt

[国外标准] JIS B1008-2009 螺栓、螺钉和螺柱的开口销槽和金属丝孔

[国外标准] JIS B1008-1988 Split Pin Holes and Wire Holes for Bolts, Screws and Studs