国外标准列表

[国外标准] BS EN 340-2003 防护服 一般要求

[国外标准] BS EN 3388-2009 航空航天系列.抗热镍基合金 NI-PH2601 (铬镍铁合金 718)外螺纹紧固件.等级1275 MPa650℃.可选制造法.技术

[国外标准] BS EN 338-2003 结构木材.强度类型

[国外标准] BS EN 3379-1996 镀银耐热镍基合金NI-P101HT(沃斯帕洛尹合金)制中长螺纹紧公差柄双六角头增高螺栓.等级1210 MPa(室温)730

[国外标准] BS EN 3375-008-2009 Aerospace Series - Cable, Electrical, for Digital Data Transmission - Part 008Si

[国外标准] BS EN 3373-014-2009 航天系列.电导线上卷曲接线片和直排接头.温度高达200℃铜导线上卷曲用绝缘密封导线接头的产品标准

[国外标准] BS EN 3373-011-2009 航空航天系列.电导体压接用终端盒和内嵌式接头.米制和英制螺柱系列用温度小于260℃、铜导体压接用镀镍环形

[国外标准] BS EN 3373-010-2009 航空航天系列.电导体压接用终端盒和内嵌式接头.米制和英制螺栓系列用温度低于150℃铜导体压接用镀锡环型终

[国外标准] BS EN 3373-002-2009 Aerospace series. Terminallugs and in-line splices for crimping on electrical co

[国外标准] BS EN 3373-001-2008 Aerospace series — Terminal lugs and in-line splices for crimping on electric co

[国外标准] BS EN 335-3-1996 Durability of wood and wood-based products Definition of hazard classes of biologic

[国外标准] BS EN 335-2-2006 Durability of wood and wood-based products Definition of use classes — Part 2 Appli

[国外标准] BS EN 335-1-2006 Durability of wood and wood-based products Definitions of use classes — Part 1 Gene

[国外标准] BS EN 334-2005﹢A1-2009 进气口压力不大于100bar的气压调节器

[国外标准] BS EN 334-2005 Gas pressure regulators for inlet pressures up to 100 bar

[国外标准] BS EN 334-1999 Gas pressure regulators for inlet pressures up to 100 bar

[国外标准] BS EN 3328-2008 航空航天系列.未涂覆的FE-PM38(FV535)型耐热钢制中螺纹长度、紧公差、十二角头螺栓.等级1000MPa-550℃

[国外标准] BS EN 3323-2009 Aerospace series — Bolts with double hexagon head, relieved shank long thread, — In

[国外标准] BS EN 3303-1997 Aerospace series — Bolts with double hexagon head, relieved shank long thread, — In

[国外标准] BS EN 3293-2008 Aerospace series — Bolts, T-head, close tolerance, medium thread length, in heat res

[国外标准] BS EN 329-1997 Sanitary tapware. Waste fittings for shower trays

[国外标准] BS EN 328-1999 heat exchangers. test procedures for establishing the performance of forced convectio

[国外标准] BS EN 322-1993 Wood-based panels - Determination of moisture content

[国外标准] BS EN 3202-1995 holes and traps for t-head bolts. design standard this standard specifies the holes

[国外标准] BS EN 32-1999 Wall-hung wash basins. Connecting dimensions